It’s been a rough couple of weeks as far as weather goes. It seems like we have had so many rainy and overcast days here in the ‘retta. We were able to get Nora outside on a few of the days that the sun peeked out and she loved every minute of it. She loves the outdoors and I can’t wait to take her camping one day soon!
This girl loves her mama so much, and now she can say “Mama” too!!!
It’s crazy, she never used to rest her head like this when she was little, but she’s started recently. Kristen and I think it is the sweetest thing and love that she’s starting to be even sweeter!
That’s right! This is the first Father/Daughter tree climbing we participated in. It went reasonably well, she did try to eat all the branches.
Because every girl has to perfect her pageant wave!
She tried to eat the leaves too. Looking back maybe she was hungry. Actually she just always wants to eat everything. Babies…
Look at my leaf everybody!
My two favorite girls as happy as can be.
A little daddy/daughter time. BTW notice the nicely cut lawn, I thought that would be the last time I mowed it but I think I might need to cut it one more time.
On second thought, I’ll just let Nora roam around and eat all the grass. She might be more effective than a goat! (Full Disclaimer, I was able to stop her from eating the grass.)
Love it! Happy babies make everyone happy!
Halloween Bonus Pictures
It’s not enough to make a new post, but Nora dressed up like a Jazzercizer for Halloween (or HalloWayne as I like to call it).
“I work out!”
Nora in the Church daycare “Fall dress up” parade!
It’s been over two months since I’ve posted… OOPS! A lot has happened since then so this post has a bit of everything. Lots of pictures (mostly of Nora) are here.
Nora started out by pulling up on EVERYTHING, and now she can walk around tables, chairs, and along walls. She has a walker that she can walk around with, but she usually runs! Soon she will be walking with no help. She can already make it up the stairs all by herself.
Kristen had a busy camp season (Actually she works in the CIA as you can see by her earpiece). Nora and I went out to see her two of the weekends she was gone. Nora had a lot of fun!
Disney World!!!! Nora’s First Trip
Even though she gave Mickey the stink eye, this girl was a CHAMP! We did 2 days in the park and we stayed in the parks the whole day. Nora napped in her stroller (one of our best purchases) and we all had a great time.
Now that this girl is over 20lbs we have to take turns holding her. I think we are both getting stronger because of it.
Nora’s first Live Disney Performance
Nora will grow up knowing that all of Disney was started by a mouse! And that Walt guy had a little something to do with it. Proof that one person really can make a difference.
Thanks random person for taking our family portrait!
Our little Snow White at the MK Entrance later in the day.
Waiting in line for her first Dumbo ride, Nora did not quite know what to do, she was looking all around and couldn’t decide whether to people watch or watch the flying elephants.
We love this little girl so much and are so thankful we had the opportunity to go to Disney word with her!
There have been quite a few “staged” photos on here of Nora and not many of normal life. This post highlights a few of our family outings and trips!
In June Nora took her first trip to Florida and got to meet a lot of her family. Her Uncle Jim did a great job playing with her and really capturing her attention!
Nora loved when her Cousin Sami held her!
The Florida Fam! It was so great to see everyone.
In preparation for our first beach trip, we took a swim in the pool. If Nora could spend all day in the pool she would. She loved it!
First time at the beach. Nora was a little confused at that sand stuff but loved the water. The ocean was as calm as a lake, which really made for a spectacular first beach trip for her.
After the fun Florida trip, Nora said she wanted to see where her Daddy grew up so we took a trip to Memphis and she got to meet more family including her Great Grandma Lucy and her twin cousins! This girl is all dressed up for the 4th of July and very happy!
She had so much fun with her cousins Seth and Tyler and her Aunt Brandi and Uncle Jon.
And no 4th of July weekend would be complete without a little time in the pool!
We took Nora hiking to see Amicalola falls and snapped a quick (Super Cheesy High School Prom style) family pic on the way down. Sorry no pictures of the falls, I was a bit too winded carrying Nora on my back up.
It’s Football Time in Tennessee!!!!!!! …and in Georgia Go Vols!
I think I found myself a Cheerleader! Now we just need to get her some Pom Pom’s.
She loved being outside on this beautiful football Saturday.
Yesterday Nora turned 6 months old and today, we got some pictures of her! It’s been a rough week for her, as she has been sick the last week (got Croup), but she was feeling much better today and was playful and happy!
This one is her glamour shot! Lots of crazy noises and we were able to capture her attention!
This baby loves looking up to her mommy!
6 Months old and getting more and more mobile every day! Its incredible how well she can get around by scooting backwards and rolling!
That’s Nora’s Gorilla grip! She loves stealing her daddy’s glasses and pulling on her mommy’s hair!
There’s that smile we all love!
6 Months, it really has gone by so fast! Everyone was right. Its been a blast!
Wow, It’s hard to believe that its already been 3 months that we’ve had Nora Grace! And two days after her 3 month birthday, Kristen and I celebrated our 6 year anniversary. It’s also crazy that it’s been 6 years, but like they say, “Time flies when you’re having fun!” It’s been a fun 6 years and a new kind of fun the last 3 months!
Nora is starting to make some really cute faces, and some heart-melting sad faces too 🙁 Here are a few pictures we got of her at 3 months!
January Update – related black and white pictures have been added in this post.
As I’m writing this, it is December 30th and the last few days have been a wild and fun adventure! Our daughter, Nora Grace, was born on December 26th at 3:14 AM. She was 8lbs. 2oz. and 20 inches. She has stolen my heart and already has me wrapped around her fingers! I just love her so much, and she is so cute so I decided I needed to capture her before she grows too much! I’ve posted some pictures below.
We just can’t get enough of this hat! I think it is really cute! Such pretty eyes!
Sleeping like… well you see the picture.
I just can’t get enough of those chubby little cheeks. Too cute!
Even the sun won’t wake this girl up when she is sleeping. She’s the best!
Love those little hands! I need to get some more hands and feet pictures before she grows any more!
Her little pink bow is precious!
Do babies dream?
This one needs a good caption! What do you think she is thinking?
Her Great Grandmother knit her this beautiful yellow blanket and she snuggles up in it so well!
Seriously, I just can’t get enough of those hands.
She did so good sleeping during her photo shoot!
I love the sunshine on her face in this picture. She is our little sunshine!!!
This one was her final picture before she started peeing and having a meltdown! Figures that she waited until we got her naked!
Being Christmas, there will be lots of people unboxing their shiny new Digital Single Lens Reflex (DSLR) cameras with dreams of instantly taking professional photos with all those megapixels! There may also be a few less excited individuals dusting off their DSLR cameras they got last year to take some family snapshots, and even a few who just leave that big camera in the closet because their phone takes pictures that are just as good. Like anything in life, becoming good at something involves more than just having the expensive gear, it means learning how to use it. As Ansel Adams once said, “The single most important component of a camera is the twelve inches behind it.” Let’s take a few minutes to improve the info in that mind of yours!
First I should say I’m not a professional photographer, but over the last few years I have graduated away from my cameras Automatic setting. I have found that in order to take the picture I want I need to know how to make the camera DO what I want, not what it wants. In this post I’ll describe two great camera modes that will give you immensely more control over your pictures. These modes are great because they let you control one parameter and let the camera take care of the rest. First you need to know a bit about how that camera works and what affects the brightness of your image.
There are three primary controls that will affect your exposure (how bright or dark your picture is).
First is Aperature, which is an element in the lens that opens bigger and closes smaller. It is essentially a circular window that changes size. As you can imagine a larger window lets in more light and makes your picture brighter and a smaller window lets in less light and makes the photo darker.
Second is shutter speed, this is how long the “Film” or sensor is exposed to the light of the picture. A shutter speed of 1/50th of a second will let in twice as much light as a shutter speed of 1/100th of a second.
Third is ISO which is the sensitivity or digital amplification of the image. It’s a bit confusing, but know that ISO100 is the base and as you get into the higher ISO’s your image quality gets worse due to digital noise. A high ISO will typically make your pictures look grainy, but the better your camera, the better it will handle high ISO shots.
Mode #1 – Av or Aperature Priority Mode
Rotate that knob over to Av and let’s get started. I would recommend experimenting with this setting to see for yourself how changing the Aperature setting affects your picture. First set your ISO to Auto (it is likely already on Auto), now you can rotate the wheel this is likely where your right index finger is .when holding the camera. As you rotate this wheel you will adjust the Aperature setting.
Zoom your lens all the way out as this will usually let you adjust the Aperature to the lowest f-stop number (depends on the lens). Try to adjust the Aperature as low as it will go. It will probably be around 3.5. The camera will adjust the ISO and shutter speed to properly expose the photo, but we are forcing the Aperature as low as it will go. Now find somewhere that you can take a picture of something close that has something else further away in the background.
First focus on the close object with the camera (Put the center point in your viewfinder on the object and half press and hold while the lens focuses) and then fully press your Shutter button to take the picture.
Now rotate that knob again until your Aperature reads f11 or a larger number and repeat what you did above. Once you have taken both pictures review them on the lcd screen (press play button) and pay special attention to the background and anything that you did not set the focus on. You should see that the picture you took with the Aperature open (small f number) has a background that is more blurred or out of focus than the picture taken with the closed down Aperature (higher f number).
As you might realize, taking a picture of a landscape or something where you want detail near and far, it’s best to use a high f number setting. I usually shoot f9 or f11 in these situations, but feel free to experiment and see what looks best. Alternatively if taking a portrait of someone where you want the background to be out of focus, you can use a lower f number Aperature setting.
This mode gives you a ton of creative control over the automatic setting and I love using it!
Mode #2 – Tv/S or Shutter Speed Control
Rotate that dial to Tv (Canon) or S (Nikon) to experiment with the shutter speed control mode. This mode will let you choose your shutter speed and adjust the other camera settings (Aperature, and ISO if set to Auto) to properly expose your photo. A good rule of thumb is that at a minimum when handholding a lens you want to use a shutter speed equal to the inverse of your focal length. With no image stabilization and shooting with a lens set to 55mm, you want to be shooting at a minimum of ~1/55th of a second. Since your camera will likely not let you set a shutter speed of 1/50th, round it up to 1/60th of a second at a minimum.
If you have Image Stabilization(IS) or Vibration Reduction(VR) then you can slow your shutter speed down even further. Try taking some pictures of a stationary object while varying the shutter speed setting. Then zoom in to the pictures with the LCD to see how decreasing the shutter speed will start to blur the photos. If shooting a non-stationary subject such as someone playing sports, or running around, the IS/VR won’t help you and you will need to use a faster shutter speed to “freeze” the action. When taking photos of a moving subject set your camera to control the shutter speed and set the speed high enough to “freeze” the action. You may need 1/250th of a second or even faster!
Another interesting effect that you can produce with Shutter Speed control is that of blurring lights. The typical long blurred lines of car headlights that you see in those night city shots is made by taking a photo with the shutter speed open for a long time (seconds instead of fractions of a second.)
Hopefully you can experiment with these two modes and improve your control of your photography.
I built a few of these for Christmas presents this year and wanted to share the build details. I found the basic design details here.
and have included some more detailed step by step instructions here.
One (1) Ceiling Fan Rod 9.5″ longOne (1) 32″ of 1″x6″ pine board, 32″ long
1/4″ plywood, I bought a sanded board that was 2’x4′ and could have made at least 6 of these with that board.Wood stainWall mounted bottle opener (I got mine at Amazon)
Cut 1×6 into 3 sections, two of them 11 inches and the third 10 inches. I used my miter saw to make these cuts nice and square, but an ordinary skilsaw or even handsaw could work.
Remember measure once cut twice!!! Wait that’s not how it goes!
I like to use a speed square to draw a quick line, its not necessary with a miter saw, but it is very useful to have a straight line if using a circular saw.
I always like like to get my eyes on the same plane of the blade to see how well it will cut “the line.”
Finished initial cuts (I was making 2 of these). In hindsight, I should have made more as it’s easy to make a few at a time.
Get out that 1/4″ sanded plywood and ideally a table saw. This could also be done with a skill saw and a piece of wood (2×4) clamped down as a guide. Be sure to be safe here, especially if you are using a falange remover… I mean table saw!
If if you are using an old table saw like I am, double check that your blade is square with the fence. We need to cut 1″ and 4″ strips. The 1″ strips are for the sides and the 4″ strips are used for the bottle separators.
Completed 1″ and 4″ strips of 1/4″ plywood.
This is where this project starts taking shape. If you’ve got a miter saw, set it for about 18 degrees (or whatever angle you like) and start your cut about an inch in. Just remember how far in you start the cut because you will need to replicate that for the other side. Flip the board over and make the same cut on the other side. If using a handsaw you’ll need to mark your lines to cut off the corners and clamp to a firm surface before cutting.
Cut plywood strips to length. Cut 1″ plywood strips in 10″ segments. You’ll need 4 of these for this project. Cut the 4″ strips into 3 pieces, two that are 5-1/2″, and one that is 8-1/2″.
Cut groove in separators. This may have been my favorite part. I borrowed a friends router table and that made this step extremely simple. If I did not have the router table I might have tried a few passes with a jigsaw, or even my regular router with some guide boards clamped with these separator pieces.
The photo below shows the guide I clamped in for the router table. I used a 1/4″ router bit and spaced the edge of the wood 2-3/4″ from the center of the bit. I set the back guide so that I would only “router” to 2-1/8″. This ensures a good fit for the separators. These settings work for all three of the 4″ pieces. For the 8-1/2″ piece after you router out one side, just flip the piece over on its short end and get the other side! Magic!
Now all of the pieces have been cut to size! The toughest part is finished.
Sand sand sand. One of the least fun parts, but very important to making a “professional” looking finished project. You want all of the edges smooth and the angle on the side pieces to be a bit rounded so there are no sharp corners.
Drill handle holes. I used a 1-1/16″ bit that I picked up on Amazon to drill holes approximately half way through the side boards. This way the handle/rod does not stick out the end and is contained within the side boards.
Stain. I used a pre-stain that helps the stain to be applied more evenly, followed by a single coat of stain on all of the wood pieces.
Before and After! One coat of this stain looked really good so I did not need to apply a second coat.
Assembly – This is where you put all the pieces together. Since the bottom piece supports all the weight and is only connected to the handle via the sides, you need to ensure that the sides are firmly attached to the bottom. To attach I used a little glue at the bottom of each of the side pieces and clamped each piece to hold the sides firmly to the bottom. I then used a nail gun and some thin nails to ensure these pieces would be firmly attached. Slip the handle in one of the drilled holes in the side and repeat for the other side.
I then used the nailgun again and put a single nail in each side of the 1″ front and back pieces, this will help to ensure that the handle stays secure in between the sides.
Slide the separator pieces into each other and drop them in, and lastly screw in the opener into one of the sides! Congrats on your new wooden 6-pack holder!